LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Wheel Hubs - Removal & Installation >> Driveline/Axle >> Front wheel hub, replacing >> Front wheel hub, steel >> Removal >> Remove the end of the drive shaft

Remove the end of the drive shaft

Fig 1: Hub Screws
GLL107866Courtesy of VOLVO CARS OF NORTH AMERICA.

Slacken off the end of the drive shaft in the hub by knocking the drive shaft into the hub approximately 10-15 mm  . Use a rubber or copper mallet.

Press the end of the drive shaft into the hub 10-20 mm  .

Remove the 4 screws for the hub.

scientia non olet · About LEMON Manuals