LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Wheel Hubs - Removal & Installation >> Driveline/Axle >> Front wheel hub, replacing >> Front wheel hub, steel >> Installation >> Installing the brake disc

Installing the brake disc

Fig 1: Installing Brake Disc
GLL105491Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the brake disc.

Tighten the brake disc locating pin. Tighten to 8 Nm  .

NOTE:

Ensure that the brake disc and wheel rim hub mating surfaces are clean.

Tighten the new drive shaft screw. See Summary of tightening torques for specific components .

Use bevel protractor 9512050 .