LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Wheel Hubs - Removal & Installation >> Driveline/Axle >> Front wheel hub, replacing >> Front wheel hub, aluminum >> Installation >> Installing the ball joint

Installing the ball joint

Fig 1: Identifying Ball Joint Nut Installation
GLL104632Courtesy of VOLVO CARS OF NORTH AMERICA.

Install a new nut on the ball joint.

NOTE:

The ball joint must not rotate. Use a Torx spanner as a counterhold so that the rubber boot is not damaged.

Tighten, see: Tightening torque .

scientia non olet · About LEMON Manuals