LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Axle, Drive Shafts - Removal, Replacement And Installation >> Drive Shaft, CV Joint (B5254T4, TF-80SC AWD; 2006-2007) >> Drive Shaft Left, Replacing >> Installation >> Installing The Sealing Ring For The Outer Joint On The Drive Shaft

Installing The Sealing Ring For The Outer Joint On The Drive Shaft

Fig 1: Identifying Rubber Seal & Constant Velocity Joint
GLL106610Courtesy of VOLVO CARS OF NORTH AMERICA.
NOTE:

On early version cars without a sealing ring, a sealing ring can be installed, P/N 949 2980

Check that the sealing ring is undamaged.

Install the sealing ring for the constant velocity joint housing as illustrated.