LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Axle, Drive Shafts - Removal, Replacement And Installation >> Drive Shaft, CV Joint (B5244T5, M66; 2005-2008) >> Drive Shaft Right, Replacing >> Installation >> Installing The Drive Shaft In The Transmission

Installing The Drive Shaft In The Transmission

Fig 1: Identifying Bearing Cap Screws
GLL109802Courtesy of VOLVO CARS OF NORTH AMERICA.

Lubricate the drive shaft mating surface. Use wheel bearing grease P/N 116 1241-3 (80 g).

Install the drive shaft on the transmission and the mounting for the pilot bearing with the bearing cap and the 2 M8 screws. Tighten.

Install the drive shaft to the wheel hub. See Drive shaft left, replacing .