Removing the drive shaft from the transmission

Fig 1: Identifying Left Drive Shaft From Gearbox & Jimmy Bar

Courtesy of VOLVO CARS OF NORTH AMERICA.

Position a container under the transmission to collect the oil (Applies to cars with manual and automatic AW50-42 transmissions).

Use jimmy tool 9995462 when removing the drive shaft.

NOTE:

Pull the constant velocity joint, not the drive shaft joints, when removing the drive shaft. There is no axle pinion.

NOTE:

Take care not to damage the drive shaft when removing it from the transmission.

Install sealing plug 9995488 in the transmission (applies to vehicles with manual and automatic AW50-42 transmissions).