LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Axle, Drive Shafts - Removal, Replacement And Installation >> Drive Shaft, CV Joint (B5204T5, Aw55-50/51SN; 2004-2007) >> Drive shaft left, replacing >> Installing the drive shaft >> Align the drive shaft in the hub and the spring strut in the wheel spindle

Align the drive shaft in the hub and the spring strut in the wheel spindle

Fig 1: Identifying Rubber Seal & Constant Velocity Joint
GLL106610

Ensure that the rubber seal is in position on the constant velocity joint.

Fig 2: Screws And Lock Nuts For Wheel Spindle And Spring Strut
GLL109238

Use new screws and lock nuts for the wheel spindle and spring strut. Tighten to light contact.

scientia non olet · About LEMON Manuals