LEMON Manuals
: Even more car manuals for everyone
Home
>>
Volvo
>>
2002
>>
S60 Base, 2.4 61, Standard
>>
Repair and Diagnosis
>>
Drivelines & Axles
>>
Differentials & Drive Axles
>>
Rear Axle, Drive Shafts - Removal, Replacement And Installation
>>
Drive Shaft, CV Joint (B5204T5, Aw55-50/51SN; 2004-2007)
>>
Drive shaft left, replacing
>>
Installing the drive shaft
>>
Adjust the wheel spindle to the dimension measured prior to removal
Adjust the wheel spindle to the dimension measured prior to removal
Fig 1: Tightening Lock Nuts
Tighten the lock nuts. Tighten to
105 Nm. Angle tighten +90 degrees°
.