LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Axle, Drive Shafts - Removal, Replacement And Installation >> Center Differential (B5244T3, Aw50/51 AWD; 2002) >> Final Drive, Transferring Components >> Installation >> Installing The Active On Demand Coupling

Installing The Active On Demand Coupling

Fig 1: Identifying Active On Demand Coupling Screws
GLL109909Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the Active on Demand Coupling on the new final drive.

Ensure that the gasket does not jump out of position.

Install the 6 screws for the Active on Demand Coupling. Do not forget the bracket for the connector.

Tighten alternately to light contact. Then tighten alternately to 25 Nm  .