Components That Are Included In The Kit And Must Be Replaced

Fig 1: Active On Demand Coupling Control Module Kit

Courtesy of VOLVO CARS OF NORTH AMERICA.

• the temperature/pressure sensor with O-ring
• washer
• the O-ring for the throttle valve seat.

Position the sealing plate in the control module

Press the throttle valve and temperature/pressure sensor into place on the control module contacts. Place the cupped washer with the convex side against the temperature/pressure sensor.

Lubricate the sealing rings on the valves with oil, P/N 116 1641-4 (0.3 liters).