LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Axle, Drive Shafts - Removal, Replacement And Installation >> Center Differential (Aw50/51 AWD; 2003-2009) >> Clutch (AOC), Replacing >> Installation >> Installing the Active on Demand Coupling

Installing the Active on Demand Coupling

NOTE:

For tightening torques, see Tightening Torque .

Fig 1: Identifying Active On Demand Coupling Bolts
GLL109935Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the coupling on the final drive housing.

Tighten the 4 M8 screws crosswise to light contact. Then tighten crosswise again.

Connect the connector to the wiring.