LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Axle, Drive Shafts - Removal, Replacement And Installation >> Center Differential (Aw50/51 AWD; 2003-2009) >> Bushings Final Drive Housing, Replacing >> Installation >> Installing The Final Drive Housing

Installing The Final Drive Housing

Fig 1: Positioning Mobile Jack (998 5972) Together With Fixture (999 5972)
GLL109877Courtesy of VOLVO CARS OF NORTH AMERICA.
NOTE:

Position the loose washer between the top of the front bushing and the rear axle member.

Lift the cover up to the final drive housing and rear axle member.

Install the 8 screws and the screw for the front bushing in the final drive.

Lightly tighten the screws alternately.

Then tighten the screws for the cover. See Summary Of Tightening Torques For Specific Components .

Tighten the M12 screw for the front bushing in the final drive housing.

scientia non olet · About LEMON Manuals