LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Drive Shaft Seal & Pilot Bearing - Removal & Installation >> Driveline/Axle >> Replacing the right drive shaft pilot bearing >> Reassembly >> Press the boot onto the constant velocity joint

Press the boot onto the constant velocity joint

Fig 1: Installing New Clamp Using Pliers 951 2619
GLL109799Courtesy of VOLVO CARS OF NORTH AMERICA.

Ensure that it is in position.

Install the new clamp. Use pliers 9512619 .

scientia non olet · About LEMON Manuals