LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Active On Demand Coupling (AOC)/Bevel Gear - Replacing >> Driveline/Axles >> Bevel gear, replacing >> Removal >> Removing the drive shaft

Removing the drive shaft

Fig 1: Drive Shaft
GLL109861Courtesy of VOLVO CARS OF NORTH AMERICA.

Press out the wheel spindle. Detach the drive shaft from the hub. Do not damage the drive shaft boot. Use a tensioner band to pull the spring strut backwards.

Remove the screws from the bearing cap for the drive shaft. Pull the drive shaft straight out.

NOTE:

Do not pull the outer part of the shaft. Doing so could damage the axial stops in the joints.

scientia non olet · About LEMON Manuals