LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Active On Demand Coupling (AOC)/Bevel Gear - Replacing >> Driveline/Axles >> Bevel gear, replacing >> Installation >> Installing the drive shaft

Installing the drive shaft

Fig 1: Drive Shaft
GLL109861Courtesy of VOLVO CARS OF NORTH AMERICA.

Check that the seal on the end of the drive shaft is correctly positioned. Seal CV joint housing, replacing

Press out the spring strut.

Locate the drive shaft in the hub.

Locate the link arm on the ball joint pinion.

scientia non olet · About LEMON Manuals