Parking brake self-adjustment, resetting: Installation

Resetting the parking brake 

Press the primary cable mounting (2) back into place.

Remove the locking pin (3). Reset the primary cable mounting to the operating position.

Remove the hose from the friction spring (1).

Installing the parking brake pedal 

Install: 

• the disconnecting cable for the pedal
• the cables for the switch before the pedal has been turned in
• the parking brake pedal, 3 screws (M8).

Finishing 

Check the function of the parking brake.

Press down and release the pedal 5 times.

Press the pedal down so that the clip cracks

Installing the relay box in the passenger compartment 

Install the relay box on the bracket.

Press the relay box forward so that the catches engage in the bracket and "click". Install the soundproofing panel using 2 screws.

Installing the OBDII bracket and soundproofing panel 

Install: 

• the OBDII bracket using the 2 screws
• the soundproofing panel using the 2 screws.