Rear Disc Brake Pads: Removal

Remove the securing spring (3) carefully so that it does not deform. See Fig 2.
Remove the protective caps (1) from the two locating pins (2). See Fig 2.
Remove the locating pins using a 7 mm hex socket.
Remove the brake caliper from the holder.
Remove the brake pads. See Fig 3.

Fig 1: Exploded View Of Rear Brake System

G00280603

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Removing Securing Spring, Caps & Pins - Rear Brakes

G00216295

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Removing Rear Brake Pads

G00216296

Courtesy of VOLVO CARS OF NORTH AMERICA.