LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake Bleeding And Disc - General Specifications >> Removal & Installation >> Rear Brake Disc >> Installation

Rear Brake Disc: Installation

  1. Install the brake disc and tighten the locating pin to specification. See TORQUE SPECIFICATIONS .
    2. NOTE: Manufacturer recommends using new caliper holder mounting bolts during installation.
  2. Install the caliper holder. Use NEW mounting bolt. Tighten to specification. See TORQUE SPECIFICATIONS .
  3. Install the brake pads and brake caliper.
  4. Install the locating pins in the brake caliper.
  5. Depress the brake pedal a few times. Check the fluid level in the brake fluid reservoir. Top off if necessary.
  6. Adjust parking brake. See PARKING/EMERGENCY BRAKE  under ADJUSTMENTS.
  7. Install wheels and tighten to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals