Diagnostic trouble code (DTC) information

Condition 

Diagnostic trouble code DDM/PDM-0005 is stored if the control module registers a low signal or open-circuit in the M+ signal cable or M- signal cable (the power supply wiring to the power window motor) when the window is operated upwards or downwards.

Diagnostic Trouble Code (DTC) DDM/PDM-0005 can be diagnosed when the power window motor is activated.

Substitute Value 

• None.

Possible Source 

• Short-circuit to ground in the M+ or M- signal cables
• Open-circuit in the M+ signal cable or M- signal cable
• Blown fuse.

Fault symptom[s] 

• The power window mechanism does not operate.