Checking the cable

Check the cable between door control module connector terminal #B4 and power window lift motor connector terminal #3. Check for an open-circuit.

Check the cable between door control module connector terminal #B3 and power window lift motor connector terminal #6. Check for an open-circuit.

Remedy as necessary.

Other information: 

• To connect the breakout box, see Connecting the breakout box
• For further information about signals and other values, see Signal specification
• To access the control module, see Driver's door module / passenger door module (DDM/PDM), replacing
• For information about checking the power supply and ground terminal, see Checking the power supply and ground terminals
• See Checking wiring and terminals .

Fig 1: Identifying Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

Was the cable OK? 

• YES 

  Refer to Replacing the window lift mechanism 

• NO 

  Refer to Verification