Installing Sun Roof
NOTE:
For tightening torques, see Tightening Torque
.
HINT: Install the screws, the spacers and the nylon washer for the gutter frame before installation.
Install:
- the screws, 4 x M6, 25 (position 1 and 2)
- the screws, 4 x M6, 14 (position 3 and 4)
- the spacers, 4 x 20, 6, 5 10 mm (position 1 and 2).
Lift the sun roof. Place the sun roof in position.
Tighten.
Install:
- the drainage. See Drainage
- the connector.
Adjust. See Sun Roof, Adjusting .
Install the headlining. See Headlining, Replacing .
Check for leakage. See Sun Roof, Leak Test .