Preparations, cargo compartment
- Remove the carpet from the luggage compartment.
- Press in the center of the clips on the lower edge of the folding side panel on the left-hand side until a click is heard.
- Remove the two clips.
- Remove the plastic nut at the front/lower edge of the side panel.
- Repeat the operation on the right-hand side.
- Turn the handle (1) on the right and left-hand sides. Turn the handle through 90°.
- Fold the side panels down and lift them out. Place the left-hand side panel to one side. There is a new panel in the kit.
- Pull the tailgate sill trim panel (2) forward on the right and left-hand sides until the clips on each side release. Pull firmly but carefully, the panel is fitted securely.
- Remove the wiring (3) for the cargo compartment lighting.
- Following which, pull the sill trim panel straight up until the four clips on the underneath release. Remove the sill trim panel.
Remove:
- the clips (1) in the left-hand front side panel in the cargo compartment.
- the front side panel and place it to one side.