Connecting the handsfree box

Fig 1: Identifying Handsfree Box Mounting Components

Courtesy of VOLVO CARS OF NORTH AMERICA.

Applies to Nokia 

• Install the adapter plate (1) on the bracket (2.) Use the screws (3) and the nuts (4).

On cars without an accessory electronic module do not use the long single cable. Hide the single cable. Insulate the cable terminal using a piece of foam tape from the kit.

Applies to Ericsson 

Fig 2: Identifying Radio, Harness, Bracket And Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Connect the cable from the carphone holder and the cable harness to the hands free box
• Connect the cable from the radio to the cable harness
• Screw the hands free box onto the bracket.

Applies to Nokia 

Fig 3: Identifying Carphone Holder, Radio, Handsfree Box, Adapter Plate, Screw And Cover

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Connect the wiring for the head restraint (1), the carphone holder (2) and the radio (3) to the handsfree-box as shown in the illustration
• Secure the hands free box on the adapter plate (5) using the screw (6). Install the cover (4).