Cargo compartment preparations
- Remove the cargo compartment carpet at the rear edge. First turn the two knobs (1) 90°.
- Pull up the front of the cargo compartment carpet. Fold the front half back over the rear half of the cargo compartment carpet.
- Slide the entire cargo compartment carpet forward slightly. Twist slightly to remove the carpet through the tailgate opening
- Remove the cargo compartment carpet.
- Press the center of the clips at the lower edge of the folding side panel on the left-hand side until they click
- Remove the two clips
- Remove the plastic nut at the front lower edge of the side panel.
- Turn the handle (1) on the left-hand side through 90°.
- Fold the side panel inwards. Lift the side panel out. Place the side panel to one side. A new panel is in the kit.
Remove:
- the clips (1) in the front left side panel in the cargo compartment
- the panel. Place the panel to one side. A new panel is in the kit.