Removing the radio/carphone
Remove the dashboard environment panel. See Dashboard environment panel (including climate control module (CCM)), replacing .
- Unscrew the two screws in the lower edge.
NOTE:
Reset the CD-mechanism to original position before replacing the unit.
Hold the radio unit in the same position as when installed in the vehicle (tilted 15-20°) as shown in the illustration. See (A) in the illustration.
Reset the CD mechanism by:
- Switch on the ignition.
- Disconnect the green connector from the radio/CD player. Wait 5 seconds
- Reconnect the green connector to the radio/CD player. The CD player has been reset
- Wait until no sound is heard from the CD mechanism.
Remove the cable harness.
Remove the radio/carphone.