Auxiliary Spotlamps
- Pry the light insert from the lamp housing using the tool supplied.
- Install the rubber grommet and the metal ring on the lamp housing.
The spot lamp can be installed in several different ways.
- Install the mounting in the required way on the lamp housing. Use two screws and two washers.
- Insert the cables through the lamp housing
- Install the flat pin contractors on both the cables
- Supply the blue cable (BL) with a socket housing to prevent short-circuits
- Connect the blue cable (BL) to the cable for the lamp
- Connect the black cable (SB) to ground on the light insert.
- Assemble the light insert and the lamp housing. Carefully stretch the cables
- Install the spot lamp on the bracket.