Installing and connecting the Global Positioning System (GPS) aerial
Fig 1: Identifying GPS Antenna, Seat Belt Holder, Cable Routing Hole, And Points For Securing Cable With Tie Straps
- Install the new Global Positioning System (GPS) aerial (1) in the guide hole. Press the Global Positioning System (GPS) aerial into place using the clip in the hole in the center of the rear edge of the parcel shelf as shown in the illustration
- Route the new cable (C in the kit illustration) for the Global Positioning System (GPS) aerial. Follow the routing of the existing loudspeaker cable inside the seat belt holder (2)
- Connect the cable to the Global Positioning System aerial
- Secure at the points (3)
- Route the cable through the lead-in (4) to the rear edge of the wheel arch.