Cable routing
Courtesy of VOLVO CARS OF NORTH AMERICA.
- Route the cable harness (1) to the antenna and the microphone down along the right-hand side of the center console, along the air ducts
- Continue to route the cable harness inside the carpet on the right hand side of the center console and via the inside of the front edge of the carpet. Route the cable harness along the right end of the dashboard and forward to the previously routed connectors from the antenna and microphone
- Connect the relevant connector to the antenna and microphone. Wrap foam tape around them and clamp securely
- Reinstall the A-post panel. Reinstall the panel on the end of the dashboard
- Reinstall the rubber strip in the door opening
- Reinstall the sill panel
- Reinstall the panel under the glove compartment.