Preparations, passenger compartment, continued

Fig 1: Identifying Seat Cushion

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Remove the rear seat cushion (1) by pulling it up at the front edge, pulling it forward and then lifting it away.

Fig 2: Remove Sill Molding For Left-Hand Rear Door

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Remove the sill trim panel at the left rear door.

Fig 3: Catches At Top Edge Of Reverse Of Side Cushion

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Fold the left-hand rear seat backrest forward.
• Remove the left-hand side bolster. First press in the catch (1) at the top of the reverse of the side bolster, and pull it out slightly.
• Grasp the cushion using both hands. Twist anti-clockwise until the catches on the inside release.
• Remove the side bolster. First pull out the top of the side bolster. Then pull upwards.

Fig 4: Identifying Side Bolster Clip

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Remove the clip at the side of the left-hand side bolster.