Installing the handsfree box

Applies to both Ericsson and Nokia

Fig 1: Positioning Hands Free Box And Bracket With Mounting Over Screw Hole In Mounting For Driver's Seat

Courtesy of VOLVO CARS OF NORTH AMERICA.

HINT: Install the aerial according to the separate Installation Instructions.

Tip the driver's seat back slightly
Position the hands free box and the bracket with the mounting over the screw hole in the right front mounting for the driver's seat
Fold the seat down towards the mountings. Check that the bracket for the hands free box is positioned under the seat rail
Clamp the cables. The seat must be able to move without the wiring stretching or breaking.

NOTE:

Ensure that the none of the wiring is trapped.

Tighten the front edge of the seat using two new screws from the kit. Tighten to 40 Nm (30lbfft) .