Installing the external base module
Courtesy of VOLVO CARS OF NORTH AMERICA.
- Check the location (as shown in the illustration). Ensure that the antenna is clear of the windscreen trim and wiper blade. Ensure that the antenna can be removed from the external base module when washing the car etc.
- Carefully clean the surface of the glass. Use the cleaning cloth supplied. Wipe dry using a rag.
- For optimum adhesion, warm the glass. Use a hair dryer for example.
Courtesy of VOLVO CARS OF NORTH AMERICA.
- Remove the backing from the external base module. Secure the external base module on the windscreen. Press hard on points 1, 2, 3, 4 and 5, in order, for 3-4 seconds.
- Ensure that the tape is sealed around the external base module.