12V socket in cargo compartment: Installation

Fig 1: Cutting Out Hole In Right-Hand Front Side Panel In Cargo Compartment

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Take the right-hand front side panel in the cargo compartment, turn it over and cut out a hole as per the existing marking. Use a hard surface as support.

Fig 2: Identifying 12V Socket Installed Through Hole In Panel

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Install the 12V socket from the kit in the hole in the panel (1).
• Install a metal bracket and nuts. Ensure that the rectangular hole in the bracket is opposite the corresponding hole in the panel.
• Tighten the 12V socket to the panel.

Fig 3: Connecting Connector To 12V Socket

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Connect the connector to the 12V socket.
• Reinstall the panel. Ensure that the panel edge (1) is in the slit (2) when installing.