Signal too high. Permanent fault: Verification: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Connecting Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off
• Reinstall the connectors, components etc.
• Ignition on
• Switch on the carphone.

  Make a call so that both the handset and the hands-free system are used. See the instruction manual.

  Ignition off.

  Ignition on.

  Read off the diagnostic trouble codes (DTCs).

  Check that the relevant diagnostic trouble code (DTC) has switched status from permanent to intermittent fault.

  Fig 3: Identifying VCT2000

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Has the status of the diagnostic trouble code (DTC) changed? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  The fault should have been detected and remedied. As this is not the case fault-tracing has failed.

  Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.