Removing front bumper and casing

Fig 1: Identifying Front Bumper, Casing, Wiper Arms And Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove: 

• wiper arms (1)
• the two screws.

• the six clips on the upper side of the casing
• Remove screw (1).

Fig 2: Identifying Screw Pressed Backwards To Release Bumper Bracket

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Slacken off one screw on each side (2), leaving each screw held in place by 3 threads
• Press the screw backwards so that the bumper bracket releases
• Press the screw so that the screw head bottoms out
• Separate the connector for the fog lamp on the left-hand side.

Fig 3: Identifying Bumper Pulled Forwards & Outwards To Release From Bumper Bracket

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Pull the bumper forwards while pulling both the sides outwards so that the edges release from the bumper bracket.

  HINT: Two people are required for this task.