Unsecuring the contact reel

Fig 1: Identifying Removal Of One Torx 20 Screw

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove one Torx 20 screw.

Fig 2: Identifying Contact Reel Turned Clockwise To Limit Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Turn the contact reel clockwise to the limit position.

Fig 3: Identifying Contact Reel Turned Counter-Clockwise Two Entire Turns

Courtesy of VOLVO CARS OF NORTH AMERICA.

Turn the contact reel counter-clockwise two entire turns. Then turn counter-clockwise further until the screw hole is at " one o'clock" as illustrated.

NOTE:

On later models, the yellow marking must also be visible in the window.