Alarm, basic kit: Reinstallation

Fig 1: Identifying Hood Catch Connector And Existing Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Install the cable on the new hood catch (from the kit)
• Install the hood catch. Secure the hood catch with the two screws.

• Connect the hood catch connector to the existing connector beside the hood catch.

Only applies to left-hand drive cars 

• Reinstall the cable to the hood opener control
• Tighten the control using the screw. Reinstall the cover
• Reinstall the carpet.

Applies to all cars 

• Check the function of the hood catches.