Installing cable harness

Fig 1: Identifying Clamps, Connector, And Short Cable End

Courtesy of VOLVO CARS OF NORTH AMERICA.

Take the cable harness from the kit. Connect the short cable (1) to the left-hand fog lamp. Connect the long cable to the right-hand fog lamp
Press the cable into place in the two clamps (2)
Connect the connector (3) to the pre-routed connector at the left-hand fender liner.

Fig 2: Identifying Clamp

Courtesy of VOLVO CARS OF NORTH AMERICA.

Press the cable harness for the right-hand fog lamp into place under the air intake. Use the existing clamps (1).