Headlamps, aligning: Notes

WARNING:

Adjustment of the headlamp beam is dependent on the legal requirements of the relevant market. Select intended market.

CAUTION:

Cars equipped with Bi-Xenon lamps or halogen lamps are adjusted in the same way. To ensure that the position sensor for the Bi-Xenon lamps is correctly calibrated calibrate as follows.

Vehicles without Four-C see, VIDA, Car communication, function group 3, rear electronic module (REM), Calibrating the Bi-Xenon lamp position sensor
Vehicles with Four-C see, VIDA, vehicle communication, function group 7, suspension module (SUM), calibrating the system.

NOTE:

Go to adjustment:

See Adjustment