Checking the wiring and component
- Ignition off.
Check the cable between carphone handset D3 (terminal #34) and carphone control module A3 (terminal #3) for a short-circuit to supply voltage according to Short-circuit to supply voltage, intermittent faults .
Try replacing the carphone handset if no fault is found in the wiring.
Remedy as necessary.
Other information:
- To access and replace the handset, see Handset, replacing
- To access or replace the carphone module, see Phone module (PHM), replacing
- To connect the breakout box, see Connecting the breakout box. Carphone module
- For information about signals and connectors, see Signal description. Phone module (PHM) .