Checking the wiring
Check the cable between fuse 11D/4 terminal #2 and relay 2/80 terminal #5. Check the cable between relay 2/80 terminal #3 and the left and right upper lamp housing switches terminal #3. Check these cables for a short-circuit to supply voltage according to Short-circuit to supply voltage. Permanent faults .
Remedy as necessary.
Other information:
- For further information about signals and other values, see Signal specification
- To connect the breakout box, see Connecting the breakout box .
- To access the integrated relay / fusebox in the cargo compartment, see Relay/fuse box cargo compartment/Rear electronic module (REM), replacing .
Was a fault detected?
- YES
OKAY: Troubleshooting has been completed.
- NO
FAULT NOT FOUND: Troubleshooting has been completed.