Remove the nuts, screw and tie straps

Fig 1: Identifying Starter Motor Nuts, Screw And Bolt

Courtesy of VOLVO CARS OF NORTH AMERICA.

CAUTION:

The wiring to the throttle body must not be cut off. The throttle body may need to returned complete.

If the wiring to the throttle body is behind the bracket for the starter motor:

Slacken off the nuts (x 2).

Remove the screw.

Remove any tie straps and disconnect the connector for the throttle body.

Route the wiring for the throttle body from the reverse of the bracket for the starter motor.