LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2000 >> V70 Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panels >> Removal & Installation >> Gauges >> Removal & Installation

Removal & Installation

  1. Remove instrument cluster. See INSTRUMENT CLUSTER  . Place instrument cluster on bench facing down. Release retaining clip at lower center and pull cluster housing out while depressing remaining retainers.
  2. Remove 2 screws attaching gauge needing replacement. Carefully pry upward on gauges to remove from housing. To install, reverse removal procedure. Use care to install odometer reset button properly.
scientia non olet · About LEMON Manuals