Checking the brake control module (BCM)

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Connecting Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off
• Reconnect the connectors. Reinstall the components
• Switch on the ignition for at least 10 seconds.

  Read off the control module ID from the brake control module (BCM) by clicking on the VCT2000 symbol.

  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Could the control module ID be read off? 

• YES 

  OKAY:  Troubleshooting has been completed.

• NO 

  Refer to Information