Springs & Shock Absorbers: Installation
- Using a NEW nut, install mount on shock absorber. Tighten nut to 30 ft. lbs. (40 N.m) for standard shock absorbers, or 59 ft. lbs. (80 N.m) for Nivomat shock absorbers. Position a jack under trailing arm and raise trailing arm. Ensure spring is installed correctly in upper spring seat. Install shock absorber on lower mount. Tighten shock absorber nut to 59 ft. lbs. (80 N.m). Tighten upper shock absorber bolts to 18 ft. lbs. (25 N.m).
- Reinstall trunk panels at front edge with clips. Using Loctite, install back rest catch pins. Tighten catch pin bolts to 14 ft. lbs. (20 N.m). Reinstall cover plate and luggage area carpet.