LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2000 >> S70 GLT SE >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 2.3L & 2.4L 5-Cylinder, Turbo >> Removal & Installation >> Oil Cooler >> Installation

Oil Cooler: Installation

  1. Use new seals. The seals must be greased prior to installation.
  2. Install the oil cooler. Screw the 4 oil cooler screws into place. Tighten to 12 ft. lbs. (17 N.m).
  3. Install coolant hoses. Remove the lock grip pliers.
  4. Check engine oil and coolant levels. Start engine. Run it to operating temperature. Then check that there is no leakage. Check if the oil or coolant needs topping up.
scientia non olet · About LEMON Manuals