LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2000 >> S70 GLT SE >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brakes - Repair >> Removal & Installation >> Rear Disc >> Inspection

Rear Disc: Inspection

  1. Make sure that hub flange is clean. Remove rust with a steel blade and steel brush.
  2. Brush off any dirt on pulse wheel and wheel sensor with a soft brush.
  3. If hub is damaged, measure the hub lateral runout. See MEASURING HUB LATERAL RUN-OUT  under SERVICING.