LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2000 >> S70 GLT SE >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brakes - Repair >> Removal & Installation >> Rear Disc Pads >> Installation

Rear Disc Pads: Installation

  1. Grease shim on both sides with a thin layer of silicone grease.
  2. Install shim towards brake pad rear plates.
  3. Install brake pads.
  4. Install one split pin and retaining spring first, then the other split pin.