Removal (C70, S70 & V70)
- Deactivate air bag system before performing any service operation. See AIR BAG RESTRAINT SYSTEMS article. Ensure front wheels are in straight-ahead position. Remove air bag module Torx bolts from rear of steering wheel. Disconnect electrical connector and remove air bag. See Figure .
- Mark steering wheel-to-column location for reassembly reference. Remove steering wheel hub retaining bolt. Remove plastic warning label retaining screw from steering wheel, leaving screw attached to plastic warning label. Insert screw into hole, locking contact reel pin. Carefully pull steering wheel from column, allowing wiring and plastic warning label to pass through hole in steering wheel. See Figure .