Volvo on-board diagnostic (OBD) system

With the VIDA PC it is possible to:

• read off and erase stored diagnostic trouble codes (DTCs)
• activate components or functions according to certain predetermined patterns
• continuously monitor the values and status of the input and output signals for the signals
• read off the control module identification
• program and read off the programmed values
• reset the mileage for a new car
• reset the service reminder lamp (SRL).

The following conditions must be met before the Volvo on-board diagnostic (OBD) system is activated:

• the ignition must be on
• the battery voltage must be normal.