Checking components and wiring

Diagnostic Trouble Code (DTC) CI-0C 

Check the combined instrument panel and LPG control module connectors. Check for contact resistance and oxidation.

Check the signal cable between combined instrument panel terminal #B12 (#42) and LPG control module terminal #J1/04 (#A4). Check for an open-circuit. Check for a short-circuit to supply voltage.

Diagnostic Trouble Code (DTC) CI-0D 

Check the signal cable between combined instrument panel terminal #B12 (#42) and LPG control module terminal #J1/04 (#A4). Check for a short-circuit to ground.

Remedy as necessary.

Other information: 

• To connect the breakout box to the combined instrument panel, see Connecting the breakout box
• To connect the breakout box to the LPG control module, see Connecting the breakout box to the LPG control module 
• For information about combined instrument panel signals, see Signal specification
• See Contents .

Fig 1: Identifying Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Ohm Meter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Continue 

  Refer to Information